Pool tables can develop worn spots and rips in the surface if not treated carefully. This will throw a game off for most people and charges of fixing the game in favor of you can be brought by even the friendliest competitors. The nature of the covering, which is felt, will have a lot to do with how the table is used, so a rip or worn area must be repaired or replaced. This pool table refelting is best done by a company who does this all of the time.
If it is a small rip, it can be repaired by you with a lot of patience and a good quality adhesive. A very sharp knife will also be needed as well as some sandpaper. Measuring the hole, cutting the felt and making sure it fits will take attention to detail. Just the right amount of glue will also not be easy to judge. But, again, looks are not as important as how it might effect the game.
One of the best courses of action should be to have the entire surface recovered. This will ensure that the table has a fresh look, ready for whatever you throw at it, although not literally of course. Getting help in this project from a professional in Denver, CO will be as easy as giving them a call or stopping by the several that are available in the Mile High City. A do it yourself project of this type will need the help of a few professionals.
You will find that a professional will be the better choice for this project. They have been doing this for years and have the experience to get it right, the first time. They will ask you what color of felt you would like and this opens a lot of possibilities for you and the room in which it is placed.
Most stock pool tables come in the basic, standard, green felt. This makes yours look like all others. You may want to stand out a little with other colors that are available. This is your time to decide about this as you can select reds, blues, purples, creams and several other colors. There are also pieces that have geometric designs and some with actual images on them. This will help brighten your room and that next party.
Watching the professionals go to work on your table will help you understand what they are doing and more about this game piece. The measurements will be exacting as will the dismantling of the rails. Removing the felt and old glue will make the way clear for the new piece. Old staples will also be removed so they do not interfere with a proper installation.
That felt piece will be cut to the proper width and length. This will extend past the edge of the slate or bed and allow the staples to hold it onto the surface. A very thin, solid layer of adhesive is applied and the felt is laid over the surface. This is stretched in all dimensions to ensure it is perfectly flat and the staples are applied under the rail location.
Disassembled rails are covered and reinstalled. Since the pool table is more than just good looks, a proper refelting job is more than important. Making sure the enjoyment of this game piece continues is what this is all about. Bragging rights for your selection of a interesting color or design is also in the offing.
If it is a small rip, it can be repaired by you with a lot of patience and a good quality adhesive. A very sharp knife will also be needed as well as some sandpaper. Measuring the hole, cutting the felt and making sure it fits will take attention to detail. Just the right amount of glue will also not be easy to judge. But, again, looks are not as important as how it might effect the game.
One of the best courses of action should be to have the entire surface recovered. This will ensure that the table has a fresh look, ready for whatever you throw at it, although not literally of course. Getting help in this project from a professional in Denver, CO will be as easy as giving them a call or stopping by the several that are available in the Mile High City. A do it yourself project of this type will need the help of a few professionals.
You will find that a professional will be the better choice for this project. They have been doing this for years and have the experience to get it right, the first time. They will ask you what color of felt you would like and this opens a lot of possibilities for you and the room in which it is placed.
Most stock pool tables come in the basic, standard, green felt. This makes yours look like all others. You may want to stand out a little with other colors that are available. This is your time to decide about this as you can select reds, blues, purples, creams and several other colors. There are also pieces that have geometric designs and some with actual images on them. This will help brighten your room and that next party.
Watching the professionals go to work on your table will help you understand what they are doing and more about this game piece. The measurements will be exacting as will the dismantling of the rails. Removing the felt and old glue will make the way clear for the new piece. Old staples will also be removed so they do not interfere with a proper installation.
That felt piece will be cut to the proper width and length. This will extend past the edge of the slate or bed and allow the staples to hold it onto the surface. A very thin, solid layer of adhesive is applied and the felt is laid over the surface. This is stretched in all dimensions to ensure it is perfectly flat and the staples are applied under the rail location.
Disassembled rails are covered and reinstalled. Since the pool table is more than just good looks, a proper refelting job is more than important. Making sure the enjoyment of this game piece continues is what this is all about. Bragging rights for your selection of a interesting color or design is also in the offing.
About the Author:
You can visit www.americanbilliardsservice.com for more helpful information about Pool Table Refelting Is Best Left To The Professionals.